| 381 |
|
Welding Research Supplement - Microhardness Variations In NSLA-100 Welds Fabricated with New Ultra-Low-Carbon Weld Consumables - Welding consumables with minor levels of carbon were tested with the prospect of eliminating preheat and interpass requirements when welding high-strength low-alloy steels/
|
Moon, D W
|
American Welding Society]
|
2000
|
|
|
|
| 382 |
|
Welding Research Supplement - Model Equation for Predicting the Tensile Strength of Resistance-Brazed Joints - A model is developed to predict tensile strength based on current variation during resistance brazing/
|
Takeshita, K
|
American Welding Society]
|
2000
|
|
|
|
| 383 |
|
Welding Research Supplement - Modeling of Projection Welding Processes Using Coupled Finite Element Analyses An analysis procedure was developed to study the electrical, thermal and mechanical aspects of projection welding/
|
Sun, X
|
American Welding Society]
|
2000
|
|
|
|
| 384 |
|
Welding Research Supplement - Nature and Evolution of the Fusion Boundary In Ferritic-Austenitic Dissimilar Metal Welds -- Part 2: On-Cooling Transformations - An investigation into the microstructure at the fusion boundary leads to a better understanding of the cracking mechanism associated with dissimilar welds/
|
Nelson, T W
|
American Welding Society]
|
2000
|
|
|
|
| 385 |
|
Welding Research Supplement - Oxygen Equivalent Effects on the Mechanical Properties of Titanium Welds - In an effort to find a reliable nondestructive test for titanium, the effects of carbon, oxygen, nitrogen and cooling rate on weld properties were studied/
|
Harwig, D D
|
American Welding Society]
|
2000
|
|
|
|
| 386 |
|
Welding Research Supplement - Prediction and Optimization of Weld Bead Volume for the Submerged Arc Process -- Part 1 - Process variables as they affect submerged arc welding of pipe were studied and analyzed/
|
Gunaraj, V
|
American Welding Society]
|
2000
|
|
|
|
| 387 |
|
Welding Research Supplement - Prediction and Optimization of Weld Bead Volume for the Submerged Arc Process -- Part 2 - Analytic models were developed to relate process parameters with weld bead quality/
|
Gunaral, V
|
American Welding Society]
|
2000
|
|
|
|
| 388 |
|
Welding Research Supplement - Root Weld Formation In Modified Refractory Flux One-Sided Welding: Part 1 -- Effect of Welding Variables - The influence of welding variables on the integrity of welds produced by a refractory flux method is defined/
|
Malin, V
|
American Welding Society]
|
2001
|
|
|
|
| 389 |
|
Welding Research Supplement - Root Weld Formation in Modified Refractory Flux One-Sided Welding: Part 2 -- Effect of Joint Geometry - The influence of joint geometry on the integrity of welds produced by a refractory flux method is defined/
|
Malin, V
|
American Welding Society]
|
2001
|
|
|
|
| 390 |
|
Welding Research Supplement - Simulation of Dynamic Behavior in a GMAW System - A model is proposed to predict the variations in welding parameters with the short circuiting transfer mode/
|
Choi, J H
|
American Welding Society]
|
2001
|
|
|
|
| 391 |
|
Welding Research Supplement - Structural Characterization of C-Mn Steel Laser Beam Welded Joints with Powder Filler Metal - The feasibility of adding powder filler metal during welding to increase deposition rates and change alloy composition was investigated/
|
Missori, S
|
American Welding Society]
|
2000
|
|
|
|
| 392 |
|
Welding Research Supplement - The Stress-Relief Cracking Susceptibility of a New Ferritic Steel -- Part 1: Single-Pass Heat-Affected Zone Simulations - Under different heat inputs and postweld heat treatments, a new alloy is tested against a standard alloy used in high-temperature applications/
|
Nawrocki, J G
|
American Welding Society]
|
2000
|
|
|
|
| 393 |
|
Welding Research Supplement - Visualization of Marangoni Convection in Simulated Weld Pools Containing a Surface-Active Agent - An experiment was devised to find if surface-tension-driven convection can be used to increase weld penetration/
|
Limmaneevichitr, C
|
American Welding Society]
|
2000
|
|
|
|
| 394 |
|
Welding Takes the Heat of Fire and Rescue Training
|
Johnsen, M. R
|
American Welding Society]
|
1996
|
|
|
|
| 395 |
|
Welding vs. Riveting: Which Has the Fatigue Life for Airplanes?
|
Onjukka, R
|
American Welding Society]
|
1997
|
|
|
|
| 396 |
|
What Role Will Technologists Play in Tomorrow's Economy? Engineering technologists are dealing directly with customers to develop better high-tech products
|
Irving, B
|
American Welding Society]
|
1996
|
|
|
|
| 397 |
|
When regulating agencies don't recognize other qualifying agencies, audits pile up
|
Irving, B
|
American Welding Society]
|
1996
|
|
|
|
Irving, B
(13)
